The Kodak printer error code 3527 occurs due to printhead problems in your Kodak printer. Therefore, your ink cartridge may not be moving to its center position due to some blockage in the printhead area.  

How to Fix the Printhead Cartridge Jam on a Kodak Printer

Incidentally, the Kodak printer error code 3527 occurs when there is a blockage in the printhead area. This can be caused due to paper, dust, dried-up ink and other particles. Here are some effective methods to fix and resolve this error on Kodak printers. 

Method 1 – Fix Access Door and Clear Obstructions

To begin with, you need to open and find any obstructions in the printhead area. Thus, you have to remove the power adapter from the power supply and open the access door. 

Here, you may find obstructions like bits of paper, dust and clogged ink to name a few. These are the issues that are blocking the movement of the ink cartridge. 

Remove these blockages very carefully from the printer and remove the ink cartridges as well. 

Now, close the access door and reconnect the power adapter from the Kodak printer to the supply unit. If you are connecting the printing machine via USB cable to the USB port of a computer, recheck the connections and fix it. Head over to the next method to completely resolve Kodak printer error code 3527.

Method 2 – Install the Ink Cartridges of the Printer

Now, confirm that your printer is switched ‘On’. Next, check if the control panel on your printer or your computer is displaying the Kodak printer error code 3527. 

It is important to note that it can display error codes like 3515, 3525, 3601, 3618 or 3619 depending on the printer. All these codes indicate that there is a printhead carriage jam on your Kodak printer.  

Afterward, follow the steps below to completely resolve this issue. 

  1. Press the Windows logo button to open the Start menu. Here, type ‘kodak’ and select the printer driver software of your Kodak printer. 
  2. Next, head over to the Maintenance tab. Check if you see an option to ‘Install Ink Cartridges’. Subsequently, click on this checkbox and click Ok. 
  3. Afterward, follow the instructions as displayed on the screen. 
  4. Next, carefully pull the printhead to its center position if it is not moving on its own. 
  5. Finally, place the ink cartridge in its place until you hear a ‘click’ sound. This will indicate that the cartridge has been put into its place.

Concluding Note 

To summarize, you should be able to resolve Kodak printer error code 3527 by now. However, you may have to get technical support if you’re still facing this issue. This could indicate that there may be a hardware problem and you may need technical assistance.